server 1.4.2 bên ragezone

[zake100]

Requirements

• A computer with non-changing ip address
• Internet connection for this computer
• Basic linux skills

1. Install Debian 5.x
You can skip this if Debian is already installed (i.e. vServer)
Internet access is required

• Download Debian 5.x netinstall and burn image to CD
• Boot your PC from CD
• Most of the installation process should be self explaining
• As file system i've selected ext2, if you plan to handle a large amount of small files you should choose a journaling file system i.e. ReiserFS
• When the installer ask for package selection deselect all packages, we will install everything on our own
• After installation is complete, remove CD and reboot
• Login as root with the root password that you had set during installation
• First we update the source list
  COMMAND~: apt-get update
• Now we install the first package, the SSH server that will allow you remote access
  COMMAND~: apt-get install openssh-server
• The server files used in this guide are bzip2 compressed, bzip2 is required to decompress the files
  COMMAND~: apt-get install bzip2

2. Install Kernel
The generic kernel when installing Debian uses ~150 MB RAM, so we going to install a server kernel with a memory footprint of ~40 MB.
If you have enough RAM you can skip this.
SKIP THIS IF YOUR MACHINE IS A VSERVER !!!

• Figure out which kernel you use i.e. linux-image-2.6.26-2-686
  COMMAND~: uname -r
• Now view a list of available kernel images
  COMMAND~: apt-get install linux-image
• Select one of the vserver kernels that fits with your system (amd64, 686,...)
  If you have a 32 Bit system you should install an image with PAE extension to use more than 4GB RAM i.e. linux-image-2.6.26-2-vserver-686-bigmem
  COMMAND~: apt-get install linux-image-2.6.26-2-vserver-686-bigmem
• At least you can remove the current kernel if you want to...
  During uninstallation you'll be ask if you really wanna remove the kernel that is currently in use, select no to continue uninstallation
  COMMAND~: apt-get autoremove linux-image-2.6.26-2-686

3. Install PW-Server Files

• Change to the root directory
  COMMAND~: cd /
• Download the server files (host address may change in future)
  COMMAND~: wget [Only registered and activated users can see links. ]
• Extract the files
  COMMAND~: tar -xf PWServer.tar.bz2
• Now delete the downloaded archive (or keep it if you want)
  COMMAND~: rm -f PWServer.tar.bz2
• Set permissions of the pw-server files to 0755
  COMMAND~: chmod -R 0755 /PWServer
• Next we have to change all host ip addresses in the pw-server configuration files
• First we check for the current host ip in the server files, in our example lets say 192.168.0.50
  COMMAND~: cat /PWServer/glinkd/gamesys.conf | grep address
• Now lets check which host ip your machine has, in our example 81.30.158.174
  COMMAND~: ifconfig | grep "inet addr"
• Allright, time to replace all old host ip's with the ip of your machine.
  Replace the OLD-IP in the following commands with the ip from the server files (i.e. 192.168.0.50)
  Replace the NEW-IP in the following commands with the ip of your host machine (i.e. 81.30.158.174)
  COMMAND~: mv /PWServer/glinkd/gamesys.conf /PWServer/glinkd/gamesys.conf.org
  COMMAND~: sed s/OLD-IP/NEW-IP/g /PWServer/glinkd/gamesys.conf.org > /PWServer/glinkd/gamesys.conf
  COMMAND~: rm -f /PWServer/glinkd/gamesys.conf.org

4. Install Libraries

• Java Runtime Environment is required for the PW Java API (used by authd and pwAdmin)
  COMMAND~: apt-get install openjdk-6-jre
• For 64 Bit Debian
  Install ia32 libs and copy some required libraries not contained in ia32
  COMMAND~: apt-get install ia32-libs
  COMMAND~: cp -f /PWServer/.setup/lib/libstdc++.so.5.0.7 /lib32/libstdc++.so.5
  COMMAND~: cp -f /PWServer/.setup/lib/libpcre.so.3.12.1 /lib32/libpcre.so.0
  COMMAND~: cp -f /PWServer/.setup/lib/libtask.so /lib32/libtask.so
• For 32 Bit Debian
  Copy some required libraries
  COMMAND~: cp -f /PWServer/.setup/lib/libstdc++.so.5.0.7 /usr/lib/libstdc++.so.5
  COMMAND~: cp -f /PWServer/.setup/lib/libpcre.so.3.12.1 /usr/lib/libpcre.so.0
  COMMAND~: cp -f /PWServer/.setup/lib/libtask.so /usr/lib/libtask.so

5. Install MySQL

• First install MySQL, during installation you'll be asked for a root password, remeber it!
  COMMAND~: apt-get install mysql-server
• After installation you can create the database 'pw' and import the base table scheme.
  Replace the PASSWORD in the following commands with your mysql password
  COMMAND~: mysql -u root -pPASSWORD -e "create database pw;"
  COMMAND~: mysql -u root -pPASSWORD -h localhost pw < /PWServer/.setup/pwdb.sql
• We have to replace the default mysql password in the pw-server files with your mysql password.
  Replace the PASSWORD in the following commands with your mysql password
  COMMAND~: mv /PWServer/authd/table.xml /PWServer/authd/table.xml.org
  COMMAND~: sed s/password=\"root\"/password=\"PASSWORD\"/g /PWServer/authd/table.xml.org > /PWServer/authd/table.xml
  COMMAND~: rm -f /PWServer/authd/table.xml.org

6. Configure PW Web Administration (Jetty + pwAdmin)
For detailed information about pwAdmin read the [Only registered and activated users can see links. ]

• The following will change the default mysql password to give pwAdmin access to your mysql database
  Replace the PASSWORD in the following commands with your mysql
  COMMAND~: sed s/db_password\ =\ \"root\"/db_password\ =\ \"PASSWORD\"/g /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp > /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp.new
  COMMAND~: mv -f /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp.new /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp

7. Autostart Jetty Web Application Server
The document root of jetty is located in /PWServer/jetty-7.1.6/webapps/ROOT
For more infromation on the jetty web application server read the [Only registered and activated users can see links. ]

• Jetty uses a PHP servlet, so we need to install php-cgi
  COMMAND~: apt-get install php5-cgi php5-mysql
• It's really useful to start the webserver with system boot, we install an init script and register it to the startup runlevels
  COMMAND~: cp /PWServer/.setup/jetty /etc/init.d/jetty
  COMMAND~: update-rc.d jetty defaults

8. Autostart Basic Firewall

• This will install a basic firewall which has incoming ports open on 22(SSH), 8080(HTTP-ALT) and 29000(Perfect World)
  COMMAND~: cp /PWServer/.setup/firewall /etc/init.d/firewall
  COMMAND~: update-rc.d firewall defaults

9. Finalize

• You have reached the end of the server guide, it's time to restart your machine
  COMMAND~: reboot
• You can now open a Web Browser on a remote PC and loading the start page of the server that should show a phpinfo() page if everything is correct
  Replace the SERVER-IP in the following command with your server ip
  [Only registered and activated users can see links. ]
• At the top of the page is a link to pwAdmin and adminer. pwAdmin is the pw-server web administration interface, adminer is a php based mysql administration interface.
  Click pwAdmin
• The default password for pwAdmin is "root", but pwAdmin demands to enter a new password, so on the first login enter the password you wanna use (hint: the password will be stored md5 encoded in "WEB-INF/.pwadminconf.jsp" just in case you wanna change it somtime)
• On the account tab you can create a new account
• On the server control tab you can start the server
• Use a client patched with pwd.codeplex.com... guide for client will coming later
• have fun...

Mình đang down về và sẽ test thử xem sao
Debian chắc dùng ubuntu cũng được vì ubuntu cũng là dòng debian mà

[zake100]

có vẻ như không có ai quan tâm thì phải nhỉ

[lalakers1192]

cái này là 1.3.6 có đồ 1.4.2 hả mod

[zake100]

thấy nó ghi là server 1.4.2 nhưng mình theo dõi topic ấy thì chưa thấy cái hình demo nào và có ý kiến nói là server 1.3.6 có item 1.4.2. cũng chưa có thông tin chính xác cứ cài thử sẽ rõ thôi

[lalakers1192]

vậy mod thử xem rùi post hướng dẫn lên cho mọi người.tk

[HellsAngel]

Ko có SV files hửm?????
Test thành công thử mở online đi

[gunbound1012]

1.3.6 item 1.4.2 nhìn trong file global_api.lua thì biết sao phải test

[goder2910]

Cái này giống như kiểu update từ 1.3.6 thôi.Forum Ragezone nó đã khẳng định là nó ko có server Tideborn rồi mà.

[kjmbialon]

Hè hè Hàng nóng test thử nào nhưng em nghi 1.3.6 thêm item 1.4.2