Spaceclaim engineer 2015 2015.0 x86 x64 [Multilingual] (29/4/2015)

[Only registered and activated users can see links. ]

Spaceclaim engineer 2015 2015.0 x86/x64 [Multilingual]
Size: 1.4 GB Type: Software


Year / Date of Release: 2014
Version: 2015.0
Developer: SpaceClaim
Bit depth: 32bit, 64bit
Language: Multilingual (Russian available)
Medicine: Present
System requirements: Operating Systems:
Microsoft Windows 7 32-bit and 64-bit
Microsoft Windows 8 64-bit
SpaceClaim is not supported on virtual platforms (See note below).
Intel-based Apple hardware running native Windows using Boot Camp is not supported.
Video Card:
Requires Full DirectX 9c, Shader Model 3.0 hardware support, 256 MB of graphics memory or higher, 32 bits per pixel, 1024x768 minimum resolution.
The following commonly used video cards support the above requirements1:
Radeon:
ATI Radeon R300, R420, R520, R600, or R700 series.
Radeon 9x00 cards (9700, 9800, ...) or newer
NVIDIA:
NVIDIA GeForce FX, 6, 7, or 8 series. NVIDIA FX5200s or newer
AMD:
AMD FireGL T2-128 or higher (including the 'Mobility' series for laptops)
CPU:
Pentium 4 2.0 GHZ or Athlon 2000+ or ??faster, 32-bit (x86) or 64-bit (x64) processor
RAM:
Minimum: 512MB RAM (32-bit), 1Gb RAM (64-bit)
Recommended: 2GB RAM or higher
Other:
CD drive (only for CD installation)
2 Button Mouse with Wheel
3D Mouse (3Dconnexion - Optional)
Multi-touch:
Multi-touch now works on all Windows 7 and 8 devices via the native pen-and-touch interface.
Note regarding Microsoft .NET Framework 4.0:
SpaceClaim requires .NET 4.0, and an installer for .NET 4.0 is included within the SpaceClaim installer.
It is possible in some cases that a corrupt version of .NET will be detected as the correct version by the SpaceClaim installer. If this happens, SpaceClaim will be installed, but will not run properly. To remedy this, please manually install .NET 4.0 using Microsoft's web site, Microsoft Update or Windows Update. On some occasions, this may involve cleaning the .NET installation by uninstalling any .NET components and re-installing them all. More details can be found on Microsoft's web site here.
Once the .NET 4.0 installation is successful, the SpaceClaim installation should proceed normally.
Note on virtual platforms:
Users report successfully operating SpaceClaim on VMware Workstation 7.x and Player 3.x.
Description: The program for creating and editing solid-state 3D-models, primarily addressed to engineers who need to contribute to the development of products, but which do not currently use any of the "primary MCAD-systems. The program can work with most formats of 3D MCAD-systems, as well as store data in its own, completely open format, based on the technology of XML.
Supported formats: ACIS, STEP, IGES, ECAD, Rhinoceros, CGR, DWG, DXF, STL, OBJ, XAML, VRML and others.
Extras. Information: The program is installed, but falls in viewer mode. I hope somebody will be able to win it and tell me how to do it.

[Only registered and activated users can see links. ]

DOWNLOAD LINKS:

Code:
http://rapidgator.net/file/c51a437f2af79bc61e8dec8af010aed3/SPCL2015.part1.rar.html
http://rapidgator.net/file/09c385568aff2b61d1cf2622a17ea2fe/SPCL2015.part2.rar.html

http://uploaded.net/file/z0puxg2u/SPCL2015.part1.rar
http://uploaded.net/file/nwvr9247/SPCL2015.part2.rar

http://www.uploadable.ch/file/F4QDektJrmkV/SPCL2015.part1.rar
http://www.uploadable.ch/file/4P6Esn9yBZRp/SPCL2015.part2.rar

http://www.nitroflare.com/view/20DEDAB645CFAD7/SPCL2015.part1.rar
http://www.nitroflare.com/view/CA1FF461F87756C/SPCL2015.part2.rar