Altium Designer v15.0.8 Build 38726 (11/01/14)

[Only registered and activated users can see links. ]

Altium Designer v15.0.8 Build 38726 | 2.98 GB


Altium Limited, a global leader in Electronic Design Automation, native 3D PCB design systems (Altium Designer) and embedded software development toolkits (TASKING), announced the update of its professional printed circuit board (PCB) and electronic system level design software, Altium Designer 15.
Altium Designer 15 demonstrates the continuing commitment by Altium to produce software and solutions that increase productivity and reduce user stress during challenging electronics design projects. It reflects Altium's commitment to supporting customer success by delivering products that customers both want and need. In keeping with these objectives, Altium Designer 15 includes powerful new enhancements for designing the next generation of high-speed printed circuit boards, and keeping up with the leading trends in industry with support for new fabrication output standards.


High Speed Signal Pin Pairs

Modern designs require signal propagation at rates up to 100 gigabits per second. Designing to these specifications in previous generation design software is challenging. This process traditionally required manual rework and careful signal planning outside of the design tool, typically in a spreadsheet program - causing additional steps and introducing lots of room for errors. With Altium Designer 15 a new Pin Pairs feature has been added to:

- Enable accurate length and phase tuning across termination components.
- Enable length, phase and delay tuning traversing an entire signal path.

Designers will no longer require external software or have to maintain complex lists of signals and nets, but instead will be able to plan and route groups of high speed nets with much greater efficiency and accuracy.

IPC-2581 and Gerber X2 Support

As a Computer Aided Manufacturing format, traditional Gerber has its origins in standard RS-274D published almost 35 years ago; many consider "standard Gerber" to be out of date. Ucamco have recently updated RS-274X to Gerber X2 to incorporate critical fabrication data previously missing, and the International Printed Circuit association has developed an entirely new standard, IPC-2581. Both resolve issues of ambiguous or missing data encountered when using older formats such as Gerber RS-274X to hand off design to fabrication, completely describing a PCB according to its design:

- Copper layer images.
- Plated and unplated holes, slots, routes, grooves and microvias.
- PCB design outline and cutout regions.
- Complex layer stack regions.
- Rigid and flexible board areas.
- Material specifications.
- Fabrication notes, tolerances, and other critical standards-compliance information.

Altium Designer 15 introduces support for both IPC-2581 and Gerber X2, keeping designers up to date while giving them a choice that broadens their selection of PCB fabrication partners.

Along with additional new features and ongoing maintenance based on solid customer feedback, Altium Designer 15 will enhance electronics engineering workflow and reduce communication bottlenecks between designers and manufacturers.

Version 15.0.8
Build: 38726 Date:26 December 2014

4206 IPC Footprint Wizard - PSON Solder Mask Expansion default setting changed back to "Expansion value from rules"
4261 Altium Designer no longer requests that Adobe Reader be installed on the system.
4396 Issues with opening older Protel/Altium designs have been resolved.
4417 If an Outjob PDF included =VariantName in the filename it could cause an exception, this no longer occurs.
4438 Acrobat Reader XI is now properly recognized by Altium Designer
4443 Fixed error with Pin Swapping affecting xSignals
4444 Import MCAD IDX menu entry moved to the File ?» Import menu.
4446 Altium Designer no longer hangs while generating Board Stack report (BC:5002)
4447 Excel processes no longer remain running after Excel-based report generation.
4449 Redundant dialog about shelved polygon removed from STEP exporter
4452 Proper net name is being shown for shelved polygons in Polygon Manager
4458 Ctrl+R (Rubber Stamp) now works correctly in the Schematic editors.
4478 "Invalid argument to date encode" error during release to Vault is fixed
4479 Fixed naming of features in exported step files
4487 Fixed CADSTAR schematic importer
4493 Fixed crash in cmplib while openning file with models requiring update
4497 Certain editing scenarios could result in an exception in the schematic editor (error details included "read of address 80808088"), this no longer occurs.
4504 New polygons were immediately shelved in some installations of Altium Designer, this no longer occurs.
4506 Fixed issue with sch print via PDF printer in outputjob (BC:4947)
4537 Fixed disappearing wire dragging in sch
4539 It was not possible to have CmpLib folders of the same name, with a different path - this has been resolved.
4560 xSignal related length matching DRC are now shown in report and violations panel (BC:4960)
4586 Fixed Orcad importer
4590 BOM generation do not hangs anymore, when ActiveBOM is used as source with Variant switch

About Altium Ltd.

Altium Limited is an Australian multinational software corporation that focuses on 3D PCB design, electronics design and embedded system development software.

Altium Designer, a unified electronics design environment links all aspects of smart systems design in a single application that is priced as affordable as possible. With this unique range of technologies Altium enables electronics designers to innovate, harness the latest devices and technologies, manage their projects across broad design 'ecosystems', and create connected, intelligent products.

Name: Altium Designer
Version: 15.0.8 build 38726
Interface: english
OS: Windows Seven / 8


DOWNLOAD LINKS:

Code:
http://rapidgator.net/file/d9d8275db6d1f7384e979d50e93a30bc/tiAlDe1508.part1.rar.html
http://rapidgator.net/file/c94ffc407ed6cd40e0524f60b1657fe1/tiAlDe1508.part2.rar.html
http://rapidgator.net/file/cb677c6474a47cf8c32e1e1b6b243365/tiAlDe1508.part3.rar.html
http://rapidgator.net/file/68ee9fdbcb3d7b136d914947fd7f6dd2/tiAlDe1508.part4.rar.html

http://uploaded.net/file/6ul5it86/tiAlDe1508.part1.rar
http://uploaded.net/file/t0jlmgbx/tiAlDe1508.part2.rar
http://uploaded.net/file/98p00guy/tiAlDe1508.part3.rar
http://uploaded.net/file/0geu50yy/tiAlDe1508.part4.rar

http://www.nitroflare.com/view/B3B06281416FA32/tiAlDe1508.part1.rar
http://www.nitroflare.com/view/E7EED2A05BC8B43/tiAlDe1508.part2.rar
http://www.nitroflare.com/view/24BF52F4D99BC87/tiAlDe1508.part3.rar
http://www.nitroflare.com/view/B32FC4AC7BA6DB3/tiAlDe1508.part4.rar

http://www.uploadable.ch/file/UDXNndhSxMUt/tiAlDe1508.part1.rar
http://www.uploadable.ch/file/3jWk4rHxrn5Q/tiAlDe1508.part2.rar
http://www.uploadable.ch/file/2RAp8mp7NvWs/tiAlDe1508.part3.rar
http://www.uploadable.ch/file/FZfXwBEA4NSa/tiAlDe1508.part4.rar