Hook .dll GS Part II

[LordBilly]

We begin with Part II

Write the name of our. Dll respecting case sensitive

[Only registered and activated users can see links. ]

We give OK and we deveria be as follows:

[Only registered and activated users can see links. ]

Now Copy the OFFSET where our tipeamos. Dll in this case would 006B2FA5, and copy our notepad

[Only registered and activated users can see links. ]

Now repeat the same thing for our hisimos. Dll looking for some more free offset down and write Start, copy the offset used to "Start" on our notepad

[Only registered and activated users can see links. ]

Well done this once, let's write the following, we leave a free and Precionar offset the space key and type the following

PUSH 6B2FA5

6B2FA5 = OFFSET OUR where she wrote. DLL, check the Notepad and type the UDS PLS USE THAT

[Only registered and activated users can see links. ]

Well after going to the next echo Precionar offset and the space bar, go to our notepad and copy the function LoadLibraryA

which we had previously copied and pasted in the window that opens, click on the button "Assemble" and we would in the form below

[Only registered and activated users can see links. ]

Well summer that there was added, now go to the NEXT OFFSET and wrote the following:

OR EAX, EAX

We give the Assemble button and we would have as follows

[Only registered and activated users can see links. ]

Well now Precionar our space bar and do the EntryPoint JE, Acuerdence that we noted in our notepad

[Only registered and activated users can see links. ]

Well now we PUSH OFFSET in the initiative which had been noted in our Notepad

[Only registered and activated users can see links. ]

An echo once we move to next offset Precionar the space bar and type the following

PUSH EAX

[Only registered and activated users can see links. ]

End Part II

[mylove09]

thanks! Good Job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!