Autodesk Simulation Moldflow Products With CFD 2016 (x64) (May 16, 2015)

[Only registered and activated users can see links. ]

Autodesk Simulation Moldflow Products With CFD 2016 (x64) | 25.56 GB


Autodesk Simulation Moldflow Adviser provides tools to inspect products, molds and tooling well before the start of their production. Simulation of casting by using Digital Prototyping reduces the number of physical prototypes required for testing, and faster time to market. Providing an intuitive learning and everyday work, Autodesk Simulation Moldflow Adviser provides recommendations to address potential manufacturing problems. Identification of problems in the early stages of the production cycle by using Autodesk Simulation Moldflow Adviser provides reliable design and manufacture of plastic parts.

Autodesk Simulation Moldflow Insight offers a complete set of tools for plastic injection, with which you can optimize the digital prototype. Autodesk Simulation Moldflow Insight allows you to analyze the injection molding process and provides accurate modeling and optimization of plastic parts and molds for them. Autodesk Simulation Moldflow Insight allows you to simulate the injection phase and holding pressure, to predict the movement of the melt front and ensure high quality of the parts. Widely used by many manufacturers in the automotive and packaging industries, as well as in medical and consumer electronics, Autodesk Simulation Moldflow Insight reduces the need for rework and physical prototypes, minimize production delays and helps businesses in record time to market for innovative products.

Autodesk Simulation Moldflow Synergy - a graphical user interface for Autodesk Moldflow Insight. It provides a quick, simple method of preparing, running and post-processing an analysis for a model. It also has fast, easy-to-use wizards for creating multiple cavities, runner systems, cooling circuits, mold boundaries and inserts. Included with Autodesk Moldflow Synergy is a material searching capability for the extensive material database. Material creation tools exist to import, change / modify and create materials to be used for any Autodesk Moldflow Insight analysis. To communicate your results with colleagues, Autodesk Moldflow Insight has a report generation facility that creates reports. You can customize the reports to contain any of the results derived from an analysis. The reports can contain images of the part (s) analyzed, including any of the animated results. One report can contain results from any number of analyses or studies.

Autodesk Simulation Moldflow Communicator (included in the distribution Adviser and Synergy) - is a free viewer that helps to establish collaboration with manufacturing personnel, procurement specialists, suppliers and customers. Viewer results of Autodesk Simulation Moldflow Communicator works directly with files Moldflow, giving all stakeholders an opportunity to study and compare the results of calculations. At any stage of the design and manufacture of plastic parts and molds for them to Autodesk Simulation Moldflow Communicator allows you to share the results of calculations with participants in a distributed project team. This helps reduce the amount of costly improvements and avoid a lot of manufacturing defects.

Design and manufacture of plastic products more effectively with software Moldflow� Design, part of the Digital Prototyping solutions. Moldflow Design existing programs running in 3D CAD, providing about the feedback in real time to manufacturability, cost and environmental impact of your design.

Software Autodesk� CFD computational fluid dynamics provide and thermal simulation tools to help you make great products. Couple CFD Design Study environment solver to predict product performance, optimize design and verify the behavior of a product to manufacture.

Year / Release Date: 2015
Version: 2016
Developer: Autodesk
Bit: 64bit
Language: Multilingual (Russian available)
Medicine: Present
System Requirements: Supported platforms Windows,
Operating System Service Pack
Windows 8 or 8.1 (64-bit)
Windows 8
Windows 8 Pro
Windows 8 Enterprise
Windows 7 (64-bit)
Windows 7 Professional
Windows 7 Enterprise
Windows 7 Ultimate
SP1 or higher

Supported platforms Windows - Insight (solvers) only
Operating System Service Pack
Windows Server 2012 R2 (64-bit)

Important: Autodesk Moldflow Synergy - User interface is not supported on Linux.
System Specifications for Windows,

Minimum and recommended hardware specifications and software for Windows,
Component Recommended
Processor speed 2 GHz or higher
Memory (RAM) 8 GB or higher
Virtual memory / swap space 4 GB or higher
Disk space 12 GB or more free disk space for (at least 2 GB of free disk space for installation)
Web browser Internet Explorer 9.0 or later

Note: Autodesk Moldflow 2016 products only supported operating systems 64-bit Windows.

Third-Party Software
The help system requires Microsoft Internet Explorer 9.0 or later. All the updated browsers, including Google Chrome, Firefox, Safari, Opera, and are also supported.
Reports generated Autodesk Moldflow products are optimized for use with Internet Explorer 9.0 and Office 2010 and later (PowerPoint only applications Word).
System Specifications for Linux

Minimum and recommended hardware specifications and software for Linux
Component Recommended
The processor speed of 1 GHz or higher
Memory (RAM) 2 GB or higher
Virtual memory / swap space 1 GB or higher
Disk space 4 GB or more for free space (at least 600 MB of free disk space for installation)
Note: a physical memory available, the **** Autodesk Moldflow Insight perform, particularly when analyzing larger models. If you are planning to use the cool (BEM) or distortion solvers on large models, or any of the 3D modules extensively, you should consider installing 2.0 GB of RAM per core processor.

Disk space requirements
The table below shows the recommended distribution of disk space to install Autodesk Moldflow Insight and other related products.
Disk space requirements Installation
The software is installed Installed size on disk (approximately)
Autodesk Moldflow Synergy - User Interface 2.3 GB
Autodesk Moldflow Insight - Solvers 622 MB
Autodesk Moldflow Communicator 1.0 GB
Note: During installation, you will need about twice the disk space as described above.

Requirements catalog space project
Disk space requirements for the study depends on the sequence analysis and model size. 3D Cool (BEM), or 3D analysis of deformation, large, complex models may require up to 10 GB of disk space in the project directory.
Disk space requirements for a typical research
Sequence Analysis Technology Analysis Disk Space Needed in
project directory (approximately)
Fill + Pack (20000 model element) Midplane 500 MB
Complete package + + Cool (BEM) Midplane 700 MB
Complete package + + Cool (BEM) + Deformation Midplane 900 MB
Fill + Pack (20000 element models) Dual Domain 500 MB
Complete package + + Cool (FEM)
(20000 element models) Dual Domain 1.5 GB
Fill + Pack (300000 tetrahedra model) 3D 1GB
Complete package + + Cool (FEM) (300,000 tetrahedra model) 3D 2GB
Complete package + + Cool (BEM) (300,000 tetrahedra model) 3D 10 GB 11 All 3D Cool (IgE) analyzes have high disk space requirements for the temporary directory.

Graphics Requirements
Graphic requirements listed here represent the minimum necessary to obtain acceptable simulation.
512 MB DRAM or higher, OpenGL-compatible graphics card. Make sure you have installed the latest driver for your card. Please refer to the card manufacturer's website for drivers and instructions.
24-bit color setting on the screen resolution of 1280 x 1024 and above.

Note: Autodesk does not warrant the use of a particular card. Autodesk will make every effort to work with the card manufacturer to resolve any problems that may arise from the use of our software with a particular card. However, we can not guarantee that all questions related to the graphics can be fixed, as they may be within the card manufacturer's drivers, not the software Autodesk.

Recommended
The software makes extensive use of OpenGL and texturing, therefore any device offering OpenGL acceleration and texture memory will improve performance.
Unsupported graphics cards
Use the following graphics cards and drivers potentially cause your computer to lock up.
Video Card Driver
Geforce GT220 320.18-desktop-win8-win7-winvista-64bit-englishwhql
320.49-desktop-win8-win7-winvista-64bit-englishwhql
331.65-desktop-win8-win7-winvista-64bit-englishwhql
This card, together with these drivers are not supported for use with Autodesk Moldflow products and should not be used to avoid potential problems

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

DOWNLOAD LINKS:

Code:
http://rapidgator.net/file/29e9cd6deb8e684362b63c496ccbace1/Autodesk_Simulation_Moldflow__CFD_2016.part01.rar.html
http://rapidgator.net/file/1311909c519e51277a81db0c652f1559/Autodesk_Simulation_Moldflow__CFD_2016.part02.rar.html
http://rapidgator.net/file/191ac7ac59150a8c0b4cca2875622d46/Autodesk_Simulation_Moldflow__CFD_2016.part03.rar.html
http://rapidgator.net/file/72297be24f22d3225ac274bb643a4a4f/Autodesk_Simulation_Moldflow__CFD_2016.part04.rar.html
http://rapidgator.net/file/438ed6b62754d2ad5633e35a964cc8a5/Autodesk_Simulation_Moldflow__CFD_2016.part05.rar.html
http://rapidgator.net/file/465bf501ab95d9200e98a9c47a988c0b/Autodesk_Simulation_Moldflow__CFD_2016.part06.rar.html
http://rapidgator.net/file/b0f0ec87e4b75dbcc8228967def9ade0/Autodesk_Simulation_Moldflow__CFD_2016.part07.rar.html
http://rapidgator.net/file/f16f02abc78b18130b87bb2044ba8334/Autodesk_Simulation_Moldflow__CFD_2016.part08.rar.html
http://rapidgator.net/file/2b7d35e09fe74afdda975d7b4d35e241/Autodesk_Simulation_Moldflow__CFD_2016.part09.rar.html
http://rapidgator.net/file/a62f5e38de17d1309e02ed3456bb0f5f/Autodesk_Simulation_Moldflow__CFD_2016.part10.rar.html
http://rapidgator.net/file/0de6ba0c2ee15ef3b8aeb370441d0e73/Autodesk_Simulation_Moldflow__CFD_2016.part11.rar.html
http://rapidgator.net/file/624a850064234eaf7c0f749aebd95f25/Autodesk_Simulation_Moldflow__CFD_2016.part12.rar.html
http://rapidgator.net/file/c9863a322f1975705f7c970c14bf33df/Autodesk_Simulation_Moldflow__CFD_2016.part13.rar.html

http://uploaded.net/file/pugb2r45/Autodesk_Simulation_Moldflow__CFD_2016.part01.rar
http://uploaded.net/file/rx8u58g6/Autodesk_Simulation_Moldflow__CFD_2016.part02.rar
http://uploaded.net/file/8cy9a23t/Autodesk_Simulation_Moldflow__CFD_2016.part03.rar
http://uploaded.net/file/cxw7qbt4/Autodesk_Simulation_Moldflow__CFD_2016.part04.rar
http://uploaded.net/file/c2s0ptjf/Autodesk_Simulation_Moldflow__CFD_2016.part05.rar
http://uploaded.net/file/vbr31t3o/Autodesk_Simulation_Moldflow__CFD_2016.part06.rar
http://uploaded.net/file/u5m6484k/Autodesk_Simulation_Moldflow__CFD_2016.part07.rar
http://uploaded.net/file/zv9h6jmk/Autodesk_Simulation_Moldflow__CFD_2016.part08.rar
http://uploaded.net/file/jemdd8at/Autodesk_Simulation_Moldflow__CFD_2016.part09.rar
http://uploaded.net/file/ai0ndy1l/Autodesk_Simulation_Moldflow__CFD_2016.part10.rar
http://uploaded.net/file/8z223hot/Autodesk_Simulation_Moldflow__CFD_2016.part11.rar
http://uploaded.net/file/cyvpm1s1/Autodesk_Simulation_Moldflow__CFD_2016.part12.rar
http://uploaded.net/file/vi47wnyg/Autodesk_Simulation_Moldflow__CFD_2016.part13.rar

http://www.nitroflare.com/view/A82A221C1126A4E/Autodesk_Simulation_Moldflow__CFD_2016.part01.rar
http://www.nitroflare.com/view/A52AB62792432F3/Autodesk_Simulation_Moldflow__CFD_2016.part02.rar
http://www.nitroflare.com/view/C975E4707C20689/Autodesk_Simulation_Moldflow__CFD_2016.part03.rar
http://www.nitroflare.com/view/4BA2BAF03A37FBB/Autodesk_Simulation_Moldflow__CFD_2016.part04.rar
http://www.nitroflare.com/view/DFF4A93C3D27034/Autodesk_Simulation_Moldflow__CFD_2016.part05.rar
http://www.nitroflare.com/view/A7E5BC10665D12E/Autodesk_Simulation_Moldflow__CFD_2016.part06.rar
http://www.nitroflare.com/view/9662608AC9447AA/Autodesk_Simulation_Moldflow__CFD_2016.part07.rar
http://www.nitroflare.com/view/FBFDE94CB2FDBBA/Autodesk_Simulation_Moldflow__CFD_2016.part08.rar
http://www.nitroflare.com/view/1B88278ACF226E9/Autodesk_Simulation_Moldflow__CFD_2016.part09.rar
http://www.nitroflare.com/view/ED629DDAF327AE0/Autodesk_Simulation_Moldflow__CFD_2016.part10.rar
http://www.nitroflare.com/view/6904B0519F8DDE5/Autodesk_Simulation_Moldflow__CFD_2016.part11.rar
http://www.nitroflare.com/view/EFD78E1DAEBBBC6/Autodesk_Simulation_Moldflow__CFD_2016.part12.rar
http://www.nitroflare.com/view/04DC3C806A18C2A/Autodesk_Simulation_Moldflow__CFD_2016.part13.rar

http://www.uploadable.ch/file/agc93pRK28Rt/Autodesk_Simulation_Moldflow__CFD_2016.part01.rar
http://www.uploadable.ch/file/3Q7pvmq5XMuH/Autodesk_Simulation_Moldflow__CFD_2016.part02.rar
http://www.uploadable.ch/file/7mxrQ2CHNeCP/Autodesk_Simulation_Moldflow__CFD_2016.part03.rar
http://www.uploadable.ch/file/WHJM4hA2mnBQ/Autodesk_Simulation_Moldflow__CFD_2016.part04.rar
http://www.uploadable.ch/file/f4B4k7zXwNCB/Autodesk_Simulation_Moldflow__CFD_2016.part05.rar
http://www.uploadable.ch/file/gp8TkTDebSZc/Autodesk_Simulation_Moldflow__CFD_2016.part06.rar
http://www.uploadable.ch/file/YprAyMCqrqn2/Autodesk_Simulation_Moldflow__CFD_2016.part07.rar
http://www.uploadable.ch/file/JpKRYuQBCYh3/Autodesk_Simulation_Moldflow__CFD_2016.part08.rar
http://www.uploadable.ch/file/xUcuGx5thVwe/Autodesk_Simulation_Moldflow__CFD_2016.part09.rar
http://www.uploadable.ch/file/DwhzZY3x3vyg/Autodesk_Simulation_Moldflow__CFD_2016.part10.rar
http://www.uploadable.ch/file/utUdbtXR2jWk/Autodesk_Simulation_Moldflow__CFD_2016.part11.rar
http://www.uploadable.ch/file/EeWqhRRsfmVA/Autodesk_Simulation_Moldflow__CFD_2016.part12.rar
http://www.uploadable.ch/file/gkSGZKfZQWdQ/Autodesk_Simulation_Moldflow__CFD_2016.part13.rar