[Only registered and activated users can see links. ]
Autodesk Moldflow Design 2016-XFORCE | 840.9 mb

Autodesk Inc., a world leader in 2D and 3D design and entertainment software for the media and entertainment markets, announced the release of Moldflow Design 2016 (formerly Simulation DFM), it's works within your existing 3D CAD program, providing near real-time feedback on the manufacturability, cost, and environmental impact of your plastic component design.

Design decisions can impact on the manufacturability of a plastic injection molded part.

Autodesk Moldflow Design gives feedback on the implications of design decisions via a set of three icons that represent the manufacturability, cost, and environmental impact considerations.

Vary a part feature dimension and both the manufacturability and the cost could change. Select an alternate material and get quick feedback on the cost and environmental impact of the choice.

Most of the parameters used to calculate these indicators are configurable, making the results relevant to the type of project being undertaken.

Note:

- Autodesk Moldflow Design does not support multi-bodied parts.
- Unless specified, Autodesk Moldflow Design assumes the plastic being used is polypropylene.

[Only registered and activated users can see links. ]

Code:

Download From RapidGator
http://rapidgator.net/file/76a3a02341ec91db16edacffc0dcf62d/odAuMoD16.rar.html

Download From Uploaded
http://uploaded.net/file/m2src4rf/odAuMoD16.rar

Download From Uploadable
http://www.uploadable.ch/file/Gnx9YUu3AueK/odAuMoD16.rar