lỗi Job khi reset lại máy

[PhamNinh]

cái này là bị sao các bác. hôm trước còn ngon, nay reset máy thì bị như thế này

[Only registered and activated users can see links. ]



với lại cái ủy thác online của mình, sao dùng không đc. nó có thông báo ủy thác online thành công. mà không nhận được điểm ủy thác.

bác nào biết chỉ mình với tks

[heroviet2301]

Mình từng bị 1 lần như này rồi khi chỉ chạy có 4 Job của NBB, xóa đi chạy lại Job thì vẫn bị, kiểu như ai đó hack vào vps rồi làm cho nó lỗi ấy

[PhamNinh]

Mình từng bị 1 lần như này rồi khi chỉ chạy có 4 Job của NBB, xóa đi chạy lại Job thì vẫn bị, kiểu như ai đó hack vào vps rồi làm cho nó lỗi ấy

ý bạn nói là hacker . mới thuê VPS. còn chưa làm j` mà

[The Gamer]

chạy toàn query ko cần thiết

[PhamNinh]

chạy toàn query ko cần thiết

ừm. thì có full Job thì mình chạy thôi....

h còn bị cái nữa là sao mình ủy thác Online. nó có báo đang ủy thác mà k lên điểm

bác nào biết k, chỉ mình với

mình đã đặt ở sv1: servername= server-1


ủy thác off thì vô tư mà onl thì ko đc.

[heroviet2301]

Toàn job của Qweb thì chịu chưa sài bao giờ nên chưa biết .

[lequangvu]

Có thể cấu trúc JOB bị lỗi không khớp với DB bạn à

[PhamNinh]

Có thể cấu trúc JOB bị lỗi không khớp với DB bạn à

bạn có query Job của nbb không bạn? share mình với

[MrKubjn]

BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'IPBonus')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''IPBonus'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'IPBonus' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'IPBonus', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'exec IPBonus_NetBanBe  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'5''', @enabled = 1, @freq_type = 4, @active_start_date = 20120229, @active_start_time = 600, @freq_interval = 1, @freq_subday_type = 4, @freq_subday_interval = 5, @freq_relative_interval = 0, @freq_recurrence_factor = 0, @active_end_date = 99991231, @active_end_time = 235959
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO
BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'ResetUyThacDaily')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''ResetUyThacDaily'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'ResetUyThacDaily' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'ResetUyThacDaily', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'Update Character SET UyThacOffline_Daily=0 WHERE UyThacOffline_Daily>0  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'0h0''', @enabled = 1, @freq_type = 4, @active_start_date = 20120229, @active_start_time = 0, @freq_interval = 1, @freq_subday_type = 1, @freq_subday_interval = 0, @freq_relative_interval = 0, @freq_recurrence_factor = 0, @active_end_date = 99991231, @active_end_time = 235959
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO
BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'LogOut')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''LogOut'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'LogOut' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'LogOut', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'UPDATE MEMB_STAT SET ConnectStat=0 WHERE ConnectStat=1  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'SQLStart', @enabled = 1, @freq_type = 64
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO
BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'FixPointUyThac')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''FixPointUyThac'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'FixPointUyThac' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'FixPointUyThac', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'Update Character SET PointUyThac=1440 WHERE PointUyThac>1440  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'1h', @enabled = 1, @freq_type = 4, @active_start_date = 20120229, @active_start_time = 800, @freq_interval = 1, @freq_subday_type = 8, @freq_subday_interval = 1, @freq_relative_interval = 0, @freq_recurrence_factor = 0, @active_end_date = 99991231, @active_end_time = 235959
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO
BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'UyThacOnline')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''UyThacOnline'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'UyThacOnline' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'UyThacOnline', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'exec PointUyThac_by_NetBanBe  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'5''', @enabled = 1, @freq_type = 4, @active_start_date = 20120229, @active_start_time = 500, @freq_interval = 1, @freq_subday_type = 4, @freq_subday_interval = 5, @freq_relative_interval = 0, @freq_recurrence_factor = 0, @active_end_date = 99991231, @active_end_time = 235959
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO
BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'ResetPK')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''ResetPK'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'ResetPK' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'ResetPK', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'UPDATE Character SET PkCount=0 WHERE PkLevel<=3 AND PkTime=0  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'23h59''', @enabled = 1, @freq_type = 4, @active_start_date = 20120229, @active_start_time = 235900, @freq_interval = 1, @freq_subday_type = 1, @freq_subday_interval = 0, @freq_relative_interval = 0, @freq_recurrence_factor = 0, @active_end_date = 99991231, @active_end_time = 235959
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO
BEGIN TRANSACTION            
  DECLARE @JobID BINARY(16)  
  DECLARE @ReturnCode INT    
  SELECT @ReturnCode = 0     
IF (SELECT COUNT(*) FROM msdb.dbo.syscategories WHERE name = N'[Uncategorized (Local)]') < 1 
  EXECUTE msdb.dbo.sp_add_category @name = N'[Uncategorized (Local)]'

  -- Delete the job with the same name (if it exists)
  SELECT @JobID = job_id     
  FROM   msdb.dbo.sysjobs    
  WHERE (name = N'TruUyThacDaily')       
  IF (@JobID IS NOT NULL)    
  BEGIN  
  -- Check if the job is a multi-server job  
  IF (EXISTS (SELECT  * 
              FROM    msdb.dbo.sysjobservers 
              WHERE   (job_id = @JobID) AND (server_id <> 0))) 
  BEGIN 
    -- There is, so abort the script 
    RAISERROR (N'Unable to import job ''TruUyThacDaily'' since there is already a multi-server job with this name.', 16, 1) 
    GOTO QuitWithRollback  
  END 
  ELSE 
    -- Delete the [local] job 
    EXECUTE msdb.dbo.sp_delete_job @job_name = N'TruUyThacDaily' 
    SELECT @JobID = NULL
  END 

BEGIN 

  -- Add the job
  EXECUTE @ReturnCode = msdb.dbo.sp_add_job @job_id = @JobID OUTPUT , @job_name = N'TruUyThacDaily', @description = N'No description available.', @category_name = N'[Uncategorized (Local)]', @enabled = 1, @notify_level_email = 0, @notify_level_page = 0, @notify_level_netsend = 0, @notify_level_eventlog = 2, @delete_level= 0
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job steps
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep @job_id = @JobID, @step_id = 1, @step_name = N'Query', @command = N'Update Character SET PointUyThac = floor(PointUyThac*9/10) Where PointUyThac>9  ', @database_name = N'MuOnline', @server = N'', @database_user_name = N'', @subsystem = N'TSQL', @cmdexec_success_code = 0, @flags = 0, @retry_attempts = 0, @retry_interval = 1, @output_file_name = N'', @on_success_step_id = 0, @on_success_action = 1, @on_fail_step_id = 0, @on_fail_action = 2
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 
  EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1 

  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the job schedules
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id = @JobID, @name = N'0h2''', @enabled = 1, @freq_type = 4, @active_start_date = 20120229, @active_start_time = 200, @freq_interval = 1, @freq_subday_type = 1, @freq_subday_interval = 0, @freq_relative_interval = 0, @freq_recurrence_factor = 0, @active_end_date = 99991231, @active_end_time = 235959
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

  -- Add the Target Servers
  EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @JobID, @server_name = N'(local)' 
  IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback 

END
COMMIT TRANSACTION          
GOTO   EndSave              
QuitWithRollback:
  IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION 
EndSave: 


GO 

[PhamNinh]

Job UyThacOnline nó vẫn bị cái lỗi này. dù mình có add Job = tay hay query.....


exec PointUyThac_by_NetBanBe

[Only registered and activated users can see links. ]