[Release]MUWeb 0.7 viết hóa + MD5

[vutuyen]

Cho Tôi hỏi tí, tôi muốn chạy web Asp ở cổng 80 và PHP ở cổng 8080 được không?

[toan2003]

mình đã từng thử chạy web asp và php cùng lúc đc, trên 1 cổng thôi, ko cần phải 2 cổng, trong 1 trang web ví dụ [Only registered and activated users can see links. ], [Only registered and activated users can see links. ] .
Bạn cài đặt, config PHP bình thường, sau đó config IIS như sau (dùng với IIS thôi nha)
Configure IIS
For these steps, open IIS Manager
(Start -> Control Panel -> Administrative Tools -> Internet Information Services (IIS) Manager).
Add and allow the PHP ISAPI Extension to IIS Web Service Extensions: C:\PHP\php5isapi.dll
When you open IIS Manager, it should connect to the local computer automatically.
Expand the local computer in the left pane
Click on "Web Service Extensions" in the left pane
In the right pane, click the blue underlined text, "Add a new Web service extension..."
Enter "PHP ISAPI Extension" as the "Extension name"
Click the "Add..." button and browse to the php5isapi.dll file in your PHP install directory
Check the "Set extension status to Allowed" checkbox and click "OK"
There are two ways to setup PHP for the web: ISAPI and CGI. ISAPI is typically more efficient and secure. If you want to add the CGI extension, in addition to or instead of the ISAPI, repeat the above, but enter "PHP CGI Extension" as the "Extension name", and enter the full path to php-cgi.exe (it will be in your PHP install directory along with php5isapi.dll).
Note that I have seen the CGI module misbehave several different ways and recommend that you stick with the ISAPI module.
The following two steps are suggested to apply to the "Web Sites" root folder in IIS Manager, but they can be applied to individual sites, instead. When applying changes to "Web Sites", note that a dialog might come up asking if you want to apply changes to a list of specific websites, too. The listed sites will be ones that have overridden any default values, so be careful about applying changes to them. Especially be careful of applying changes to the Microsoft SharePoint Administration site (thus speaks painful experience).
- Add new extension (.php)
Expand the local computer in the left pane
Right-click on "Web Sites" in the left pane, then click "Properties" in the menu that pops up
Flip top the "Home Directory" tab
Click "Configuration"
Flip to the "Mappings" tab
Click "Add..."
Enter the full path to php5isapi.dll in the "Executable" textbox (Browse... to find it more easily if you need to)
Enter ".php" in the "Extension" textbox
Select radial button "Limit to", enter "GET,POST,HEAD"
Click "OK" all the way out
This will apply to every website.
This sets up IIS to actually respond to requests for php files. Until now, IIS hadn't know what to do with php files, you just told it to pass them through php5isapi.dll.

Replace php5isapi.dll with php-cgi.exe if you chose the CGI extension in the previous step.
Again noting that I don't recommend using the CGI module...
- Turn on scripting permissions for your websites
Right-click on "Web Sites", goto Properties -> Home Directory.
Change the "Execute permissions" dropdown to "Scripts only".
- Restart IIS or Reboot Server
Right-click the local computer in the left pane of IIS Manager, click on All Tasks -> Restart IIS... -> OK
- OR -
If you modified the server's PATH environment variable in 2.5b and haven't rebooted yet, reboot now.

[PINOCHIO]

Bạn có thể chỉnh lại cho mình chỗ Ngân Hàng Được không.
-mình muốn mua-bán reset,đổi nhân vật thì tiền được trừ hoặc cộng vào tài khoản ngân hàng(bank) không liên quan gì đến tiền trên người nhân vật hết.

Nếu được xin bạn upload giùm mấy file sau khi config:
mods.php,bank_manager.php,bank.class.php.Mình mù tịt về cái này.Cảm ơn

[toan2003]

update cho bạn PINOCHIO sử dụng tiền trong bank để mua bán, đổi giới tính.
Mình cũng thấy như vậy hợp lý hơn khi sử dụng chức năng này.
Bên Ragezone sắp có bản muweb 0.8, khi nào có bản chính thức mình sẽ update, và sẽ giữ lại những chức năng mình đã thêm.
[Only registered and activated users can see links. ]

[luckyday]

sao tui down về chạy thử ngân hàng vẫn báo lỗi thế này nhỉ

Fatal error: Call to a member function fetchrow() on a non-object in C:\Program Files\xampp\htdocs\muweb\includes\bank_manager.php on line 8

bác xem lại thế nào

[toan2003]

@luckyday bạn dùng bản mới download ở trang 1 về chưa, lỗi của bạn có lẽ thiếu file.

[luckyday]

mình dùng bản 1.02N không biết web này có thích hợp với bản 1.02N không, còn bản mới tớ đã download về và chép đè lên cái cũ cậu nói nhưng vẫn không được không biết có phải data của 1.02N không hợp hay không nữa, nếu không hợp bạn có thể edit lại cho mình dùng cho bản 1.02N được không?

Thanks!

[toan2003]

@luckyday bạn có lẽ bạn thiếu colum bank khi mình update lần trước, bạn nên chạy install lại. Mình ko có data 1.02N, bạn có thể nén và up riêng folder data (DB) lên ko. Cũng có thể ko dùng đc nếu khác table hoặc colum nào đấy.

[luckyday]

đây là data của bản 1.02N bạn giúp mình nhé
[Only registered and activated users can see links. ]

[vutuyen]

mình đã từng thử chạy web asp và php cùng lúc đc, trên 1 cổng thôi, ko cần phải 2 cổng, trong 1 trang web ví dụ [Only registered and activated users can see links. ], [Only registered and activated users can see links. ] .
Bạn cài đặt, config PHP bình thường, sau đó config IIS như sau (dùng với IIS thôi nha)
Configure IIS
For these steps, open IIS Manager
(Start -> Control Panel -> Administrative Tools -> Internet Information Services (IIS) Manager).
Add and allow the PHP ISAPI Extension to IIS Web Service Extensions: C:\PHP\php5isapi.dll
When you open IIS Manager, it should connect to the local computer automatically.
Expand the local computer in the left pane
Click on "Web Service Extensions" in the left pane
In the right pane, click the blue underlined text, "Add a new Web service extension..."
Enter "PHP ISAPI Extension" as the "Extension name"
Click the "Add..." button and browse to the php5isapi.dll file in your PHP install directory
Check the "Set extension status to Allowed" checkbox and click "OK"
There are two ways to setup PHP for the web: ISAPI and CGI. ISAPI is typically more efficient and secure. If you want to add the CGI extension, in addition to or instead of the ISAPI, repeat the above, but enter "PHP CGI Extension" as the "Extension name", and enter the full path to php-cgi.exe (it will be in your PHP install directory along with php5isapi.dll).
Note that I have seen the CGI module misbehave several different ways and recommend that you stick with the ISAPI module.
The following two steps are suggested to apply to the "Web Sites" root folder in IIS Manager, but they can be applied to individual sites, instead. When applying changes to "Web Sites", note that a dialog might come up asking if you want to apply changes to a list of specific websites, too. The listed sites will be ones that have overridden any default values, so be careful about applying changes to them. Especially be careful of applying changes to the Microsoft SharePoint Administration site (thus speaks painful experience).
- Add new extension (.php)
Expand the local computer in the left pane
Right-click on "Web Sites" in the left pane, then click "Properties" in the menu that pops up
Flip top the "Home Directory" tab
Click "Configuration"
Flip to the "Mappings" tab
Click "Add..."
Enter the full path to php5isapi.dll in the "Executable" textbox (Browse... to find it more easily if you need to)
Enter ".php" in the "Extension" textbox
Select radial button "Limit to", enter "GET,POST,HEAD"
Click "OK" all the way out
This will apply to every website.
This sets up IIS to actually respond to requests for php files. Until now, IIS hadn't know what to do with php files, you just told it to pass them through php5isapi.dll.

Replace php5isapi.dll with php-cgi.exe if you chose the CGI extension in the previous step.
Again noting that I don't recommend using the CGI module...
- Turn on scripting permissions for your websites
Right-click on "Web Sites", goto Properties -> Home Directory.
Change the "Execute permissions" dropdown to "Scripts only".
- Restart IIS or Reboot Server
Right-click the local computer in the left pane of IIS Manager, click on All Tasks -> Restart IIS... -> OK
- OR -
If you modified the server's PATH environment variable in 2.5b and haven't rebooted yet, reboot now.

Trời oai, toàn tiếng anh, thôi cũng xin biết ơn bạn.