nguyenquocbo
26-12-10, 11:44 PM
Dear all
Dưới đây là tut hướng dẫn làm việc với file thông qua các hàm của thư viện IO
Áp dụng cách này để làm việc với file (đọc,ghi) trong script cho JX thì mình gặp lỗi
Gameserver báo không hiểu các hàm của thư việc IO
Chuyển qua dùng thông thường bằng hàm openfile thì OK (cái này không bàn tới)
Pro nào biết các dùng thư viện IO lập trinh script chỉ mình với
Làm cách nào dùng thư viện IO này để có thể đọc ghi file ??????
Io Library Tutorial
lua-users home
wiki
Input and Output Facilities
The I/O library provides two different styles for file manipulation. The first one uses implicit file descriptors, that is, there are operations to set a default input file and a default output file, and all input/output operations are over those default files. The second style uses explicit file descriptors.
When using implicit file descriptors, all operations are supplied by table io. When using explicit file descriptors, the operation io.open returns a file descriptor and then all operations are supplied as methods by the file descriptor.
The table io also provides three predefined file descriptors with their usual meanings from C: io.stdin, io.stdout, and io.stderr.
A file descriptor is a userdata containing the file stream (FILE*), with a distinctive metatable created by the I/O library.
Unless otherwise stated, all I/O functions return nil on failure (plus an error message as a second result) and some value different from nil on success.
file = io.open (filename [, mode])
This function opens a file, in the mode specified in the string mode. It returns a new file descriptor, or, in case of errors, nil plus an error message.
The mode string can be any of the following:
* "r" read mode (the default);
* "w" write mode;
* "a" append mode;
* "r+" update mode, all previous data is preserved;
* "w+" update mode, all previous data is erased;
* "a+" append update mode, previous data is preserved, writing is only allowed at the end of file.
The mode string may also have a b at the end, which is needed in some systems to open the file in binary mode. This string is exactly what is used in the standard C function fopen.
io.close ([file])
Equivalent to file:close. Without a file, closes the default output file.
io.flush ()
Equivalent to file:flush over the default output file.
io.input ([file])
When called with a file name, it opens the named file (in text mode), and uses it as the default input descriptor. When called with a file descriptor, it simply sets that file descriptor as the default input file. When called without parameters, it returns the current default input file descriptor.
In case of errors this function raises the error, instead of returning an error code.
io.lines ([filename])
Opens the given file name in read mode and returns an iterator function that, each time it is called, returns a new line from the file. Therefore, the construction
for line in io.lines(filename) do ... end
will iterate over all lines of the file. When the iterator function detects the end of file, it closes the file and returns nil (to finish the loop).
The call io.lines() (without a file name) is equivalent to io.input():lines(), that is, it iterates over the lines of the default input file.
io.output ([file])
Similar to io.input, but operates over the default output file.
io.read (format1, ...)
Equivalent to io.input():read.
io.tmpfile ()
Returns a descriptor for a temporary file. This file is open in update mode and it is automatically removed when the program ends.
io.type (obj)
Checks whether obj is a valid file descriptor. Returns the string "file" if obj is an open file descriptor, "closed file" if obj is a closed file descriptor, and nil if obj is not a file descriptor.
io.write (value1, ...)
Equivalent to io.output():write.
f:close ()
Closes file f.
f:flush ()
Saves any written data to file f.
f:lines ()
Returns an iterator function that, each time it is called, returns a new line from file f. Therefore, the construction
for line in f:lines() do ... end
will iterate over all lines of file f. (Unlike io.lines, this function does not close the file when the loop ends.)
f:read (format1, ...)
Reads the file f, according to the given formats, which specify what to read. For each format, the function returns a string (or a number) with the characters read, or nil if it cannot read data with the specified format. When called without formats, it uses a default format that reads the entire next line (see below).
The available formats are
* "*n" reads a number; this is the only format that returns a number instead of a string.
* "*a" reads the whole file, starting at the current position. On end of file, it returns the empty string.
* "*l" reads the next line (skipping the end of line), returning nil on end of file. This is the default format.
* number reads a string with up to that number of characters, returning nil on end of file. If number is zero, it reads nothing and returns an empty string, or nil on end of file.
f:seek ([whence] [, offset])
Sets and returns the index position for file f, measured from the beginning of the file, to the position given by offset plus a base specified by the string whence, as follows:
* "set" base is position 0 (beginning of the file);
* "cur" base is current position;
* "end" base is end of the file;
In case of success, function seek returns the final file position, measured in bytes from the beginning of the file. If this function fails, it returns nil, plus a string describing the error.
The default value for whence is "cur", and for offset is 0. Therefore, the call file:seek() returns the current file position, without changing it; the call file:seek("set") sets the position to the beginning of the file (and returns 0); and the call file:seek("end") sets the position to the end of the file, and returns its size.
f:write (value1, ...)
Writes the value of each of its arguments to file f. The arguments must be strings or numbers. To write other values, use tostring or string.format before write.
Dưới đây là tut hướng dẫn làm việc với file thông qua các hàm của thư viện IO
Áp dụng cách này để làm việc với file (đọc,ghi) trong script cho JX thì mình gặp lỗi
Gameserver báo không hiểu các hàm của thư việc IO
Chuyển qua dùng thông thường bằng hàm openfile thì OK (cái này không bàn tới)
Pro nào biết các dùng thư viện IO lập trinh script chỉ mình với
Làm cách nào dùng thư viện IO này để có thể đọc ghi file ??????
Io Library Tutorial
lua-users home
wiki
Input and Output Facilities
The I/O library provides two different styles for file manipulation. The first one uses implicit file descriptors, that is, there are operations to set a default input file and a default output file, and all input/output operations are over those default files. The second style uses explicit file descriptors.
When using implicit file descriptors, all operations are supplied by table io. When using explicit file descriptors, the operation io.open returns a file descriptor and then all operations are supplied as methods by the file descriptor.
The table io also provides three predefined file descriptors with their usual meanings from C: io.stdin, io.stdout, and io.stderr.
A file descriptor is a userdata containing the file stream (FILE*), with a distinctive metatable created by the I/O library.
Unless otherwise stated, all I/O functions return nil on failure (plus an error message as a second result) and some value different from nil on success.
file = io.open (filename [, mode])
This function opens a file, in the mode specified in the string mode. It returns a new file descriptor, or, in case of errors, nil plus an error message.
The mode string can be any of the following:
* "r" read mode (the default);
* "w" write mode;
* "a" append mode;
* "r+" update mode, all previous data is preserved;
* "w+" update mode, all previous data is erased;
* "a+" append update mode, previous data is preserved, writing is only allowed at the end of file.
The mode string may also have a b at the end, which is needed in some systems to open the file in binary mode. This string is exactly what is used in the standard C function fopen.
io.close ([file])
Equivalent to file:close. Without a file, closes the default output file.
io.flush ()
Equivalent to file:flush over the default output file.
io.input ([file])
When called with a file name, it opens the named file (in text mode), and uses it as the default input descriptor. When called with a file descriptor, it simply sets that file descriptor as the default input file. When called without parameters, it returns the current default input file descriptor.
In case of errors this function raises the error, instead of returning an error code.
io.lines ([filename])
Opens the given file name in read mode and returns an iterator function that, each time it is called, returns a new line from the file. Therefore, the construction
for line in io.lines(filename) do ... end
will iterate over all lines of the file. When the iterator function detects the end of file, it closes the file and returns nil (to finish the loop).
The call io.lines() (without a file name) is equivalent to io.input():lines(), that is, it iterates over the lines of the default input file.
io.output ([file])
Similar to io.input, but operates over the default output file.
io.read (format1, ...)
Equivalent to io.input():read.
io.tmpfile ()
Returns a descriptor for a temporary file. This file is open in update mode and it is automatically removed when the program ends.
io.type (obj)
Checks whether obj is a valid file descriptor. Returns the string "file" if obj is an open file descriptor, "closed file" if obj is a closed file descriptor, and nil if obj is not a file descriptor.
io.write (value1, ...)
Equivalent to io.output():write.
f:close ()
Closes file f.
f:flush ()
Saves any written data to file f.
f:lines ()
Returns an iterator function that, each time it is called, returns a new line from file f. Therefore, the construction
for line in f:lines() do ... end
will iterate over all lines of file f. (Unlike io.lines, this function does not close the file when the loop ends.)
f:read (format1, ...)
Reads the file f, according to the given formats, which specify what to read. For each format, the function returns a string (or a number) with the characters read, or nil if it cannot read data with the specified format. When called without formats, it uses a default format that reads the entire next line (see below).
The available formats are
* "*n" reads a number; this is the only format that returns a number instead of a string.
* "*a" reads the whole file, starting at the current position. On end of file, it returns the empty string.
* "*l" reads the next line (skipping the end of line), returning nil on end of file. This is the default format.
* number reads a string with up to that number of characters, returning nil on end of file. If number is zero, it reads nothing and returns an empty string, or nil on end of file.
f:seek ([whence] [, offset])
Sets and returns the index position for file f, measured from the beginning of the file, to the position given by offset plus a base specified by the string whence, as follows:
* "set" base is position 0 (beginning of the file);
* "cur" base is current position;
* "end" base is end of the file;
In case of success, function seek returns the final file position, measured in bytes from the beginning of the file. If this function fails, it returns nil, plus a string describing the error.
The default value for whence is "cur", and for offset is 0. Therefore, the call file:seek() returns the current file position, without changing it; the call file:seek("set") sets the position to the beginning of the file (and returns 0); and the call file:seek("end") sets the position to the end of the file, and returns its size.
f:write (value1, ...)
Writes the value of each of its arguments to file f. The arguments must be strings or numbers. To write other values, use tostring or string.format before write.