zake100
01-11-10, 11:10 AM
Requirements
A computer with non-changing ip address
Internet connection for this computer
Basic linux skills
1. Install Debian 5.x
You can skip this if Debian is already installed (i.e. vServer)
Internet access is required
Download Debian 5.x netinstall and burn image to CD
Boot your PC from CD
Most of the installation process should be self explaining
As file system i've selected ext2, if you plan to handle a large amount of small files you should choose a journaling file system i.e. ReiserFS
When the installer ask for package selection deselect all packages, we will install everything on our own
After installation is complete, remove CD and reboot
Login as root with the root password that you had set during installation
First we update the source list
COMMAND~: apt-get update
Now we install the first package, the SSH server that will allow you remote access
COMMAND~: apt-get install openssh-server
The server files used in this guide are bzip2 compressed, bzip2 is required to decompress the files
COMMAND~: apt-get install bzip2
2. Install Kernel
The generic kernel when installing Debian uses ~150 MB RAM, so we going to install a server kernel with a memory footprint of ~40 MB.
If you have enough RAM you can skip this.
SKIP THIS IF YOUR MACHINE IS A VSERVER !!!
Figure out which kernel you use i.e. linux-image-2.6.26-2-686
COMMAND~: uname -r
Now view a list of available kernel images
COMMAND~: apt-get install linux-image
Select one of the vserver kernels that fits with your system (amd64, 686,...)
If you have a 32 Bit system you should install an image with PAE extension to use more than 4GB RAM i.e. linux-image-2.6.26-2-vserver-686-bigmem
COMMAND~: apt-get install linux-image-2.6.26-2-vserver-686-bigmem
At least you can remove the current kernel if you want to...
During uninstallation you'll be ask if you really wanna remove the kernel that is currently in use, select no to continue uninstallation
COMMAND~: apt-get autoremove linux-image-2.6.26-2-686
3. Install PW-Server Files
Change to the root directory
COMMAND~: cd /
Download the server files (host address may change in future)
COMMAND~: wget <b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b> (cái này thay <b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b> bằng đường dẫn tới file PWServer.tar.bz2 nha)
(<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
Extract the files
COMMAND~: tar -xf PWServer.tar.bz2
Now delete the downloaded archive (or keep it if you want)
COMMAND~: rm -f PWServer.tar.bz2
Set permissions of the pw-server files to 0755
COMMAND~: chmod -R 0755 /PWServer
Next we have to change all host ip addresses in the pw-server configuration files
First we check for the current host ip in the server files, in our example lets say 192.168.0.50
COMMAND~: cat /PWServer/glinkd/gamesys.conf | grep address
Now lets check which host ip your machine has, in our example 81.30.158.174
COMMAND~: ifconfig | grep "inet addr"
Allright, time to replace all old host ip's with the ip of your machine.
Replace the OLD-IP in the following commands with the ip from the server files (i.e. 192.168.0.50)
Replace the NEW-IP in the following commands with the ip of your host machine (i.e. 81.30.158.174)
COMMAND~: mv /PWServer/glinkd/gamesys.conf /PWServer/glinkd/gamesys.conf.org
COMMAND~: sed s/OLD-IP/NEW-IP/g /PWServer/glinkd/gamesys.conf.org > /PWServer/glinkd/gamesys.conf
COMMAND~: rm -f /PWServer/glinkd/gamesys.conf.org
4. Install Libraries
Java Runtime Environment is required for the PW Java API (used by authd and pwAdmin)
COMMAND~: apt-get install openjdk-6-jre
For 64 Bit Debian
Install ia32 libs and copy some required libraries not contained in ia32
COMMAND~: apt-get install ia32-libs
COMMAND~: cp -f /PWServer/.setup/lib/libstdc++.so.5.0.7 /lib32/libstdc++.so.5
COMMAND~: cp -f /PWServer/.setup/lib/libpcre.so.3.12.1 /lib32/libpcre.so.0
COMMAND~: cp -f /PWServer/.setup/lib/libtask.so /lib32/libtask.so
For 32 Bit Debian
Copy some required libraries
COMMAND~: cp -f /PWServer/.setup/lib/libstdc++.so.5.0.7 /usr/lib/libstdc++.so.5
COMMAND~: cp -f /PWServer/.setup/lib/libpcre.so.3.12.1 /usr/lib/libpcre.so.0
COMMAND~: cp -f /PWServer/.setup/lib/libtask.so /usr/lib/libtask.so
5. Install MySQL
First install MySQL, during installation you'll be asked for a root password, remeber it!
COMMAND~: apt-get install mysql-server
After installation you can create the database 'pw' and import the base table scheme.
Replace the PASSWORD in the following commands with your mysql password
COMMAND~: mysql -u root -pPASSWORD -e "create database pw;"
COMMAND~: mysql -u root -pPASSWORD -h localhost pw < /PWServer/.setup/pwdb.sql
We have to replace the default mysql password in the pw-server files with your mysql password.
Replace the PASSWORD in the following commands with your mysql password
COMMAND~: mv /PWServer/authd/table.xml /PWServer/authd/table.xml.org
COMMAND~: sed s/password=\"root\"/password=\"PASSWORD\"/g /PWServer/authd/table.xml.org > /PWServer/authd/table.xml
COMMAND~: rm -f /PWServer/authd/table.xml.org
6. Configure PW Web Administration (Jetty + pwAdmin)
For detailed information about pwAdmin read the online documentation (<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
The following will change the default mysql password to give pwAdmin access to your mysql database
Replace the PASSWORD in the following commands with your mysql
COMMAND~: sed s/db_password\ =\ \"root\"/db_password\ =\ \"PASSWORD\"/g /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp > /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp.new
COMMAND~: mv -f /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp.new /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp
7. Autostart Jetty Web Application Server
The document root of jetty is located in /PWServer/jetty-7.1.6/webapps/ROOT
For more infromation on the jetty web application server read the online documentation (<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
Jetty uses a PHP servlet, so we need to install php-cgi
COMMAND~: apt-get install php5-cgi php5-mysql
It's really useful to start the webserver with system boot, we install an init script and register it to the startup runlevels
COMMAND~: cp /PWServer/.setup/jetty /etc/init.d/jetty
COMMAND~: update-rc.d jetty defaults
8. Autostart Basic Firewall
This will install a basic firewall which has incoming ports open on 22(SSH), 8080(<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>) and 29000(Perfect World)
COMMAND~: cp /PWServer/.setup/firewall /etc/init.d/firewall
COMMAND~: update-rc.d firewall defaults
9. Finalize
You have reached the end of the server guide, it's time to restart your machine
COMMAND~: reboot
You can now open a Web Browser on a remote PC and loading the start page of the server that should show a phpinfo() page if everything is correct
Replace the SERVER-IP in the following command with your server ip
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b> (<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
At the top of the page is a link to pwAdmin and adminer. pwAdmin is the pw-server web administration interface, adminer is a php based mysql administration interface.
Click pwAdmin
The default password for pwAdmin is "root", but pwAdmin demands to enter a new password, so on the first login enter the password you wanna use (hint: the password will be stored md5 encoded in "WEB-INF/.pwadminconf.jsp" just in case you wanna change it somtime)
On the account tab you can create a new account
On the server control tab you can start the server
Use a client patched with pwd.codeplex.com... guide for client will coming later
have fun...
Mình đang down về và sẽ test thử xem sao
Debian chắc dùng ubuntu cũng được vì ubuntu cũng là dòng debian mà:)>-
A computer with non-changing ip address
Internet connection for this computer
Basic linux skills
1. Install Debian 5.x
You can skip this if Debian is already installed (i.e. vServer)
Internet access is required
Download Debian 5.x netinstall and burn image to CD
Boot your PC from CD
Most of the installation process should be self explaining
As file system i've selected ext2, if you plan to handle a large amount of small files you should choose a journaling file system i.e. ReiserFS
When the installer ask for package selection deselect all packages, we will install everything on our own
After installation is complete, remove CD and reboot
Login as root with the root password that you had set during installation
First we update the source list
COMMAND~: apt-get update
Now we install the first package, the SSH server that will allow you remote access
COMMAND~: apt-get install openssh-server
The server files used in this guide are bzip2 compressed, bzip2 is required to decompress the files
COMMAND~: apt-get install bzip2
2. Install Kernel
The generic kernel when installing Debian uses ~150 MB RAM, so we going to install a server kernel with a memory footprint of ~40 MB.
If you have enough RAM you can skip this.
SKIP THIS IF YOUR MACHINE IS A VSERVER !!!
Figure out which kernel you use i.e. linux-image-2.6.26-2-686
COMMAND~: uname -r
Now view a list of available kernel images
COMMAND~: apt-get install linux-image
Select one of the vserver kernels that fits with your system (amd64, 686,...)
If you have a 32 Bit system you should install an image with PAE extension to use more than 4GB RAM i.e. linux-image-2.6.26-2-vserver-686-bigmem
COMMAND~: apt-get install linux-image-2.6.26-2-vserver-686-bigmem
At least you can remove the current kernel if you want to...
During uninstallation you'll be ask if you really wanna remove the kernel that is currently in use, select no to continue uninstallation
COMMAND~: apt-get autoremove linux-image-2.6.26-2-686
3. Install PW-Server Files
Change to the root directory
COMMAND~: cd /
Download the server files (host address may change in future)
COMMAND~: wget <b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b> (cái này thay <b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b> bằng đường dẫn tới file PWServer.tar.bz2 nha)
(<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
Extract the files
COMMAND~: tar -xf PWServer.tar.bz2
Now delete the downloaded archive (or keep it if you want)
COMMAND~: rm -f PWServer.tar.bz2
Set permissions of the pw-server files to 0755
COMMAND~: chmod -R 0755 /PWServer
Next we have to change all host ip addresses in the pw-server configuration files
First we check for the current host ip in the server files, in our example lets say 192.168.0.50
COMMAND~: cat /PWServer/glinkd/gamesys.conf | grep address
Now lets check which host ip your machine has, in our example 81.30.158.174
COMMAND~: ifconfig | grep "inet addr"
Allright, time to replace all old host ip's with the ip of your machine.
Replace the OLD-IP in the following commands with the ip from the server files (i.e. 192.168.0.50)
Replace the NEW-IP in the following commands with the ip of your host machine (i.e. 81.30.158.174)
COMMAND~: mv /PWServer/glinkd/gamesys.conf /PWServer/glinkd/gamesys.conf.org
COMMAND~: sed s/OLD-IP/NEW-IP/g /PWServer/glinkd/gamesys.conf.org > /PWServer/glinkd/gamesys.conf
COMMAND~: rm -f /PWServer/glinkd/gamesys.conf.org
4. Install Libraries
Java Runtime Environment is required for the PW Java API (used by authd and pwAdmin)
COMMAND~: apt-get install openjdk-6-jre
For 64 Bit Debian
Install ia32 libs and copy some required libraries not contained in ia32
COMMAND~: apt-get install ia32-libs
COMMAND~: cp -f /PWServer/.setup/lib/libstdc++.so.5.0.7 /lib32/libstdc++.so.5
COMMAND~: cp -f /PWServer/.setup/lib/libpcre.so.3.12.1 /lib32/libpcre.so.0
COMMAND~: cp -f /PWServer/.setup/lib/libtask.so /lib32/libtask.so
For 32 Bit Debian
Copy some required libraries
COMMAND~: cp -f /PWServer/.setup/lib/libstdc++.so.5.0.7 /usr/lib/libstdc++.so.5
COMMAND~: cp -f /PWServer/.setup/lib/libpcre.so.3.12.1 /usr/lib/libpcre.so.0
COMMAND~: cp -f /PWServer/.setup/lib/libtask.so /usr/lib/libtask.so
5. Install MySQL
First install MySQL, during installation you'll be asked for a root password, remeber it!
COMMAND~: apt-get install mysql-server
After installation you can create the database 'pw' and import the base table scheme.
Replace the PASSWORD in the following commands with your mysql password
COMMAND~: mysql -u root -pPASSWORD -e "create database pw;"
COMMAND~: mysql -u root -pPASSWORD -h localhost pw < /PWServer/.setup/pwdb.sql
We have to replace the default mysql password in the pw-server files with your mysql password.
Replace the PASSWORD in the following commands with your mysql password
COMMAND~: mv /PWServer/authd/table.xml /PWServer/authd/table.xml.org
COMMAND~: sed s/password=\"root\"/password=\"PASSWORD\"/g /PWServer/authd/table.xml.org > /PWServer/authd/table.xml
COMMAND~: rm -f /PWServer/authd/table.xml.org
6. Configure PW Web Administration (Jetty + pwAdmin)
For detailed information about pwAdmin read the online documentation (<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
The following will change the default mysql password to give pwAdmin access to your mysql database
Replace the PASSWORD in the following commands with your mysql
COMMAND~: sed s/db_password\ =\ \"root\"/db_password\ =\ \"PASSWORD\"/g /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp > /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp.new
COMMAND~: mv -f /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp.new /PWServer/jetty-7.1.6/webapps/pwAdmin/WEB-INF/.pwadminconf.jsp
7. Autostart Jetty Web Application Server
The document root of jetty is located in /PWServer/jetty-7.1.6/webapps/ROOT
For more infromation on the jetty web application server read the online documentation (<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
Jetty uses a PHP servlet, so we need to install php-cgi
COMMAND~: apt-get install php5-cgi php5-mysql
It's really useful to start the webserver with system boot, we install an init script and register it to the startup runlevels
COMMAND~: cp /PWServer/.setup/jetty /etc/init.d/jetty
COMMAND~: update-rc.d jetty defaults
8. Autostart Basic Firewall
This will install a basic firewall which has incoming ports open on 22(SSH), 8080(<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>) and 29000(Perfect World)
COMMAND~: cp /PWServer/.setup/firewall /etc/init.d/firewall
COMMAND~: update-rc.d firewall defaults
9. Finalize
You have reached the end of the server guide, it's time to restart your machine
COMMAND~: reboot
You can now open a Web Browser on a remote PC and loading the start page of the server that should show a phpinfo() page if everything is correct
Replace the SERVER-IP in the following command with your server ip
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b> (<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>)
At the top of the page is a link to pwAdmin and adminer. pwAdmin is the pw-server web administration interface, adminer is a php based mysql administration interface.
Click pwAdmin
The default password for pwAdmin is "root", but pwAdmin demands to enter a new password, so on the first login enter the password you wanna use (hint: the password will be stored md5 encoded in "WEB-INF/.pwadminconf.jsp" just in case you wanna change it somtime)
On the account tab you can create a new account
On the server control tab you can start the server
Use a client patched with pwd.codeplex.com... guide for client will coming later
have fun...
Mình đang down về và sẽ test thử xem sao
Debian chắc dùng ubuntu cũng được vì ubuntu cũng là dòng debian mà:)>-